Learn about the stainless steel tube machine

The modern stainless Steel Tube Machine adopts PLC control system and servo drive technology to achieve high-speed continuous forming at a rate of 15-30 meters per minute. It is equipped with an automatic feeding device and a laser diameter measuring instrument, enabling fully automated operation from coil unrolling, flattening, forming to diameter determination and cutting. Taking a brand JCOE tube machine as an example, its dual-wire submerged arc welding system increases the welding speed by 40% and the daily production capacity reaches over 200 meters.
The roller forming system uses Cr12MoV alloy steel rollers with a hardness of HRC58-62, ensuring a straightness tolerance of 0.05mm/m.
High-frequency induction welding technology (100-400kHz) realizes the control of weld penetration within ±0.1mm.
The online eddy current inspection and X-ray real-time detection dual system has a defect detection rate of ≥99.6%.
The modular design of the equipment supports the switching of pipe diameters ranging from Φ20 to 3000mm. By replacing the molds, it can produce:
Food-grade 316L thin-walled pipes (wall thickness 0.3-1.2mm)
Industrial thick-walled seamless pipes (wall thickness 6-50mm)
Special-shaped pipe materials such as special-section square pipes/elliptical pipes
The solid solution treatment system with a heat energy recovery device can reduce energy consumption by 30%, the oil mist collection efficiency reaches 98%, and the noise control is ≤75dB(A). The latest magnetic levitation transmission technology reduces energy consumption by another 15%, meeting the GB3096-2025 industrial noise standard.